| Lengthxwidth×Height | 835x715x1440 |
| Rated Voltage(V/N/Hz) | | 380/3/50 |
| Rated Power(kW) | 5.73 |
| Electric Current(A) | 8.7 |
| Main Heating Power(kW) | 3 |
| Main Wash Pump Power(kW) | 0.73 |
| Rinse Heating Power(kW) | 5 |
| Rinse Pump Power(kW) | 0.15 |
| Configuration |
| Water Tank Capacity(L) | 25 |
| Heat Tank Capadity(L) | 10 |
| Power Line Specifications(mm2) | 4 |
| PowerLine Length(m) | 3 |
| Water lnlet(DN | 20 |
| Drainage(DN) | 32 |
| Water Pressure(MPa) | 0.15-0.35 |
| Water MainWash Temperature(°C) | 55-65 |
| Water Rinse Temperature(C) | 82-90 |
| Water Inlet Temperature(C) | 20-60 |
| Enter Water Hardness(Mg/L) | 34~103 |
| Minimum Water Flow(L/H) | 150 |
| Washing Cyle | 60/90/120 |
| Packing Size(mm) | 840*770"1560 |
| Net Weight(kg) | 123 |
| Gros5Weight(kg | 133 |
Operation process operation process
1 Cover the drain pipe;
Check whether the filter device is in place. Generally, after 10-15
times of use, the filter device must be cleaned;
2 Turn on the power switch of the machine and pull it to "1";
3 Insert the tube of the instant-dry dispenser into the medicament
to check whether the medicament is sufficient;
4 Press the handle of the outer cover, close the cover tightly, and
the water tank will start to fill water automatically;
5 After the water injection is completed, the machine will
automatically start heating;
6. When the water tank and boiler thermometer reach the set
temperature, the machine starts to clean and rinse accordingly;
Cleaning temperature 50-55℃ Rinse temperature 80-85℃
7 Before the cleaning process starts, pour a suitable amount of
non-foaming liquid detergent into the water (if there is no
detergent dispenser)
8 Adjust selector 3 to set the desired cleaning time
Position 1 = short time Position 2 = long time
9 Put in the washing basket, close the lid, and start the cleaning
process, followed by the rinsing process; the washing process will
be displayed on the running indicator light (2)
10 The running indicator light (2) goes out, indicating the end of
the washing process
Advantages and Characteristics.
1.Double layer construction, low noise, better heat insulation
effect
2.Upper and lower rotating washing and rinse system. Washing more
reasonable.
3.Mechanical button design easy to operate
4.Reliable conveyor system with automatic overload protection
device so that dishes and plates can be directly put on the track,
thus no need to sort wares and put them in the baskets, greatly
reducing labor intensity and working time.
5.Exit end is equipped with limit switch to avoid damages on the
wares when nobody takes them off the conveyor
6.It's convenient to assemble and disassemble up/down washing arms.
It can be locked tightly with a buckle
7.With flexible modular design you can choose suitable model
according to the size of the location.
